Section 202

This tool allows applicants for the FY 2018 Section 202 Capital Advance NOFA to determine if their project is located in an area of minority elderly concentration. This tool allows applicants to identify the location of their property, pull census tract and housing market area data for that location, and to draw an alternative geography for the neighborhood if they believe that the census tract is not an accurate representation of the neighborhood. The tool will calculate the racial composition of the area and generate a report that will be emailed to the applicant.

1. Registration is required to use this system. Click "Log In" on the upper right side and then click "Create Account" to create an account. Use the email address at which you would like to receive the output file as your login. When creating an account, be sure to write down the login email and password; An email confirmation will be sent but the email will not contain the password. Returning users should click the "Log In" button, then "User Login".

2. After logging in, Users can create a report in one of two ways:

• Type in the address of the project and click Go. Confirm that the address has been located properly and click Save Project. OR
• If the address is not properly located or is unknown, use the Search box to locate the city, town, or landmark nearest the proposed site and move the marker to the correct location on the map and click Save Project.

A user can click anywhere on the map for a pop-up with a snapshot of census tract and housing market data.

3. On the left-hand side of the screen, the user can click “Show Minority & Tracts” to view the default “neighborhood” that would be assigned to the property in the assessment of minority elderly concentration. (The Tool Options are for informational purposes only and do not impact the analysis or report). If a user thinks that a geography other than Census tract is more appropriate for the minority elderly concentration analysis, click on Draw and use the mouse to draw the desired shape. Double clicking will automatically complete the shape. Remember that you have to provide the project location (using one of the two ways mentioned above) before you can do this.

4. Click "OK" on the pop-up to save the selected neighborhood and enter neighborhood name and other requested information on the subsequent pop-up, then click "Save".

5. A pop-up will confirm that the shape was saved and that an email with the neighborhood data as a PDF attachment will be sent. The email should be received at the email address used as your login. The email will come from "HUD Section 202" and the email address helpdesk@huduser.gov. Please add helpdesk@huduser.gov to your address book/allowed list to prevent spam blocking. Once the system sends the email, the PDF will also be available for download on this site by clicking "View Projects" and clicking the PDF link next to the correct project.

6. If you do not receive an email and are not able to access the PDF from this site within 24 hours, please email helpdesk@huduser.gov and include the Target Area ID for the file you have not received. The Target Area ID is accessible by clicking on the "View Projects" button. If the area you have drawn is not shown in the "View Projects" list, the tool has not yet processed the data - please check again in two hours.

7. Drawing and saving neighborhoods on this tool WILL NOT automatically transmit this information to HUD. Only submit a single PDF with your submission. If the site is located in an area of minority elderly concentration, your submission to HUD should also include a justification of whether the proposed site fits one of the exceptions permitting new construction in an area of minority elderly concentration.

Other Information:

• Click "Clear" to cancel drawing, start a new drawing, and/or clear the map of drawings.
• You must be zoomed to level 13 or more to draw and select areas.
• The "View Projects" button allows you to view your saved target neighborhood/community. You will also have the ability to load or delete them. Please note that the data cannot be loaded/viewed until the email has been sent out to you. This is also where you may download the PDF that was sent by email, but it will not appear until the email has been sent.
• Users can save as many projects as desired. Each project can be accessed or reloaded by clicking on View Projects.

This tool assists Rental Assistance Demonstration (RAD) applicants as they seek approval for a Transfer of Assistance ("TOA"). This tool allows applicants identify the location of their property and of the destination site, pull census tract and housing market area data for that location. The tool will calculate the minority concentration¹ of the area and generate a report that will be emailed to the applicant. The report, once completed to the PHA’s satisfaction, will serve as the official transcript for the PHA to submit this report to the RAD Resource Desk.

1. Registration is required to use this system. Click "Log In" on the upper right side and then click "Create Account" to create an account. Use the email address at which you would like to receive the output file as your login. When creating an account, be sure to write down the login email and password; An email confirmation will be sent but the email will not contain the password. Returning users should click the "Log In" button, then "User Login".

2. After logging in, Users can create a report in one of two ways:

• Click the Original Site button, then type in the address of the original location. It will set that as location A. Then click the Set Proposed Site button and type in the new address. It will then set that as location B.
• If the address is not properly located or is unknown, use the Search box to locate the city, town, or landmark nearest the proposed site and move the marker to the correct location on the map and click Save Project.

A user can click anywhere on the map for a pop-up with a snapshot of census tract and housing market data.

3. Then click Save Project; name the two projects and by clicking Save it will send you a report to your email on file.

4. A pop-up will confirm that the shape was saved and that an email with the neighborhood data as a PDF attachment will be sent. The email should be received at the email address used as your login. The email will come from "HUD RAD" and the email address helpdesk@huduser.gov. Please add helpdesk@huduser.gov to your address book/allowed list to prevent spam blocking. Once the system sends the email, the PDF will also be available for download on this site by clicking "View Projects" and clicking the PDF link next to the correct project.

5. If you do not receive an email and are not able to access the PDF from this site within 24 hours, please email helpdesk@huduser.gov and include the Target Area ID for the file you have not received. The Target Area ID is accessible by clicking on the "View Projects" button. If the area you have drawn is not shown in the "View Projects" list, the tool has not yet processed the data - please check again in two hours.

6. You must upload the PDF attached to the email or downloaded from this site to the RAD Resource Desk in order for HUD to receive this information.

Other Information:

• Click "Clear" to cancel drawing, start a new drawing, and/or clear the map of drawings.
• You must be zoomed to level 13 or more to draw and select areas.
• The "View Projects" button allows you to view your saved target neighborhood/community. You will also have the ability to load or delete them. Please note that the data cannot be loaded/viewed until the email has been sent out to you. This is also where you may download the PDF that was sent by email, but it will not appear until the email has been sent.
• Users can save as many projects as desired. Each project can be accessed or reloaded by clicking on View Projects.

---

¹For the definition of "minority concentration" in the RAD program, see the Rental Assistance Demonstration (RAD) Notice Regarding Fair Housing and Civil Rights Requirements and Relocation Requirements Applicable to RAD First Component – Public Housing Conversions (Notice H 2016-17/PIH 2016-17 (HA), Section 5.4.

This tool assists Rental Assistance Demonstration (RAD) applicants as they seek approval for a Transfer of Assistance ("TOA"). This tool allows applicants identify the location of their property and of the destination site, pull census tract and housing market area data for that location. The tool will calculate the poverty composition of the area and generate a report that will be emailed to the applicant. The report, once completed to the PHA’s satisfaction, will serve as the official transcript for the PHA to submit this report to the RAD Resource Desk.

1. Registration is required to use this system. Click "Log In" on the upper right side and then click "Create Account" to create an account. Use the email address at which you would like to receive the output file as your login. When creating an account, be sure to write down the login email and password; An email confirmation will be sent but the email will not contain the password. Returning users should click the "Log In" button, then "User Login".

2. After logging in, Users can create a report in one of two ways:

• Click the Original Site button, then type in the address of the original location. It will set that as location A. Then click the Set Proposed Site button and type in the new address. It will then set that as location B.
• If the address is not properly located or is unknown, use the Search box to locate the city, town, or landmark nearest the proposed site and move the marker to the correct location on the map and click Save Project.

A user can click anywhere on the map for a pop-up with a snapshot of census tract and housing market data.

3. Then click Save Project; name the two projects and by clicking Save it will send you a report to your email on file.

4. A pop-up will confirm that the shape was saved and that an email with the neighborhood data as a PDF attachment will be sent. The email should be received at the email address used as your login. The email will come from "HUD RAD" and the email address helpdesk@huduser.gov. Please add helpdesk@huduser.gov to your address book/allowed list to prevent spam blocking. Once the system sends the email, the PDF will also be available for download on this site by clicking "View Projects" and clicking the PDF link next to the correct project.

5. If you do not receive an email and are not able to access the PDF from this site within 24 hours, please email helpdesk@huduser.gov and include the Target Area ID for the file you have not received. The Target Area ID is accessible by clicking on the "View Projects" button. If the area you have drawn is not shown in the "View Projects" list, the tool has not yet processed the data - please check again in two hours.

6. You must upload the PDF attached to the email or downloaded from this site to the RAD Resource Desk in order for HUD to receive this information.

Other Information:

• Click "Clear" to cancel drawing, start a new drawing, and/or clear the map of drawings.
• You must be zoomed to level 13 or more to draw and select areas.
• The "View Projects" button allows you to view your saved target neighborhood/community. You will also have the ability to load or delete them. Please note that the data cannot be loaded/viewed until the email has been sent out to you. This is also where you may download the PDF that was sent by email, but it will not appear until the email has been sent.
• Users can save as many projects as desired. Each project can be accessed or reloaded by clicking on View Projects.

This tool assists Rental Assistance Demonstration (RAD), Section 202 or Section 811 applicants to determine if their proposed RAD project, Section 202 project or Section 811 project is located in an economically revitalizing area. This tool allows applicants to identify the location of their property, and pull census tract data for that location. The tool will gather data for certain indicators of revitalization from Census 2000 and ACS 2012-2016 and generate a report that will be emailed to the applicant.

1. Registration is required to use this system. Click "Log In" on the upper right side and then click "Create Account" to create an account. Use the email address at which you would like to receive the output file as your login. When creating an account, be sure to write down the login email and password; An email confirmation will be sent but the email will not contain the password. Returning users should click the "Log In" button, then "User Login".

2. After logging in, Users can create a report in one of two ways:

• Type in the address of the RAD, Section 202 or Section 811 project and click Go. Confirm that the address has been located properly and click Save Project. OR
• If the address is not properly located or is unknown, use the Search box to locate the city, town, or landmark nearest the proposed site and move the marker to the correct location on the map and click Save Project.

A user can click anywhere on the map for a pop-up with a snapshot of census tract data.

3. On the left-hand side of the screen, the user can “Select Year” and choose “Census 2000” or ACS “2012-2016”. The user can click one of ten default “tract” layers;

• Unemployment Rate,
• Poverty Rate,
• Median household income,
• Median home value,
• Homeownership Rate,
• Housing Vacancy Rate,
• Rental Vacancy Rate,
• Units with low income,
• Units with very low income and
• Units with extremely low income;

to view the census tract of the project. Remember that you have to provide the RAD, Section 202 or 811 project location (using one of the two ways mentioned above) before you can do this.

4. Click "Save Project" to save the selected neighborhood and enter a neighborhood name and other requested information on the subsequent pop-up, then click "Save"

5. A pop-up will confirm that the location was saved and that an email with the neighborhood data as a PDF attachment will be sent. The email will be received at the email address used as your login. The email will come from "HUD RAD", “HUD Section 202” or “HUD Section 811” and the email address, helpdesk@huduser.gov. Please add helpdesk@huduser.gov to your address book/allowed list to prevent spam blocking. Once the system sends the email, the PDF will also be available for download on this site by clicking "View Projects" and clicking the PDF link next to the correct project.

6. If you do not receive an email and are not able to access the PDF from this site within 24 hours, please email helpdesk@huduser.gov and include the Target Area ID for the file you have not received. The Target Area ID is accessible by clicking on the "View Projects" button. If the area you have selected is not shown in the "View Projects" list, the tool has not yet processed the data - please check again in two hours.

7. You must upload the PDF attached to the email or downloaded from this site to the RAD Resource Desk or with your, Section 202 or Section 811 NOFA application in order for HUD to receive this information. Drawing and saving neighborhoods on this tool will not automatically transmit this information to HUD. Only submit a single PDF with the census tract of your project to the RAD Resource Desk or with your, Section 202 or Section 811 NOFA application.

Other Information:

• You must be zoomed to level 13 or more to select areas.
• The "View Projects" button allows you to view your saved projects. You will also have the ability to load or delete them. Please note that the popup window is not the full data. The full data can only be loaded/viewed once the email has been sent out to you. This is also where you may download the PDF that was sent by email, but it will not appear until the email has been sent.
• Users can save as many projects as desired. Each project can be accessed or reloaded by clicking on "View Projects".